| Sensor Specifications & Compatibility | |
| Catalog Number | |
| Output Signal in Air | 24A - 32A (Dual Cathode) no temperature compensation |
| Response Time T 90% | < 12 seconds |
| Nominal Sensor Lifetime | 500 000 % volume Oxygen hours |
| Electrical Interface | Gold plated slip rings |
| Compatibility: | Draeger 6850645 (Dr¤ger) |
| | Babylog, Fabian, Cicero, PM8030 |
| | Evita, Oxydig, Anemone, Oxycom |
| | Incubator 8000 |
| | M08 ST13 |
| | MAX11 |
| | Invivo Magnitude |
| | 10-103-07 |
| | PT14A |
| | Teledyne R13 C-61139 |
| | Hudson 5557 (V14) |
| | VTI 101372, 100352 |
| * Note: Order E61720 with reusable cap and "o" rings |
| |
| Medical Oxygen Sensors (Fuel Cells) general specifications: |
| Measurement Range: | 0-100 % oxygen |
| Accuracy and Repeatability: | < 1 % vol. O2when calibrated at 100 % O2 |
| Zero Ofset: | < 0.5 % vol. O2in 100% N2, applied 5 minutes |
| Linearity Error: | < 3 % relative |
| Cross Interference: | < 0.5 % vol. O2response to: |
| | 10 % CO2balance N2 |
| | 80% N2O balance N2 |
| | 7.5% Halothane balance N2 |
| | 7.5 % Isofurane balance N2 |
| | 7.5 % Enfurane balance N2 |
| | 9% Sevofurane balance N2 |
| | 20% Desfurane balance N2 |
| Infuence of Humidity: | - 0.03 % rel. per % RH at 25C |
| Infuence of Pressure: | proportional to change in oxygen partial |
| | pressure |
| Infuence of Mechanical Shock: | < 1% relative after a fall from 1m |
| Operating Temperature: | 0 to 50C |
| Temperature Compensation: | built-in NTC compensation (see below) |
| Efect of Temperature | between +5 C and +25 C: 3 % relative error |
| Compensation (steady state): | between 0 C and +50 C: 8 % relative error |
| Operating Humidity: | 0-99 % RH non-condensing |
| Long Term Output Drift: | < 1 % vol oxygen per month |
| | typically < - 15 % relative over lifetime |
| Storage Temperature: | -20 to +50 C |
| Recommended Storage: | +5 to +15 C |
| Recommended Load: | 10 kOhms |
| Warm-Up Time: | < 30 minutes, after replacement of sensor |
| Weight: | approximately 28 grams |
| | approximately 43 grams E61912 series |
| Designed and manufactured according to EN ISO 9001 : 2000 and EN13485 : 2003 |
specifications are applicable at standard conditions: 1013 hPa, 25C dry ambient air
|
